WILLIAM E. GUIETTE 

        Title II Weapons Manufacturer 

                    weg@weguiette.com



TO ORDER:
I ACCEPT CREDIT CARDS, MONEY ORDERS, CHECKS.
PLEASE E-MAIL YOUR BILLING AND SHIPPING ADDRESSES ALONG WITH ORDER INFO.
IF USING A CREDIT CARD, CALL (619) 473-8806 TO GIVE ME THE NUMBER.

​​All items for sale on this site are subject to restricted export provisions of the ITAR treaty.

BFA15.   MG-34 Blank-Fire Adapter.  
Screws in front of barrel jacket and replaces front barrel bearing and booster cup. Threaded to receive flash hider. 
Threaded ½-20 blind to accept interchangeable orifice screws (3 supplied--specify which blanks you will use), which tighten in end of BFA.  Includes allen wrench, and instructions. Made from 125,000 p.s.i. 1144 steel.
 Blued.  Shipping wt.—18 oz.  
SALE PRICE:  $92.00  plus shipping.
DISCONTINUED--SOLD UNTIL STOCK EXHAUSTED.
 
BFA16.   MG-42 Blank-Fire Adapter. 
Fits in front of barrel jacket and replaces front barrel bearing and booster cup.  Bored to fit either 7.92 x 57 or Israeli 7.62 Nato barrels--specify. Threaded ½-20 blind to accept interchangeable orifice screws
(3 supplied--specify which blanks you will use), which tighten in end of BFA. Includes allen wrench, and instructions. Made from 125,000 p.s.i. 1144 steel.  Black oxide or parkerized.  Shipping wt.—18 oz. 
SALE PRICE:  $60.00  plus shipping. 

​DISCONTINUED--SOLD UNTIL STOCK EXHAUSTED.

BFA14.  MP-43/44 Blank-Fire Adapter.  
Screws on original muzzle threads against front sight base.  Machined to lock under spring-loaded detent.  Visual impact of BFA vs. original thread protector is minimal.  Threaded 3/8-24 thru to accept interchangeable orifice screws, which tighten against end of barrel for gas-tight seal.  Comes with 3 different diameter orifice screws (
specify which blanks you will use), allen wrench, and instructions.  Made from 125,000 p.s.i. 1144 steel.  Parkerized.  Shipping wt.—8 oz. 
SALE PRICE:  $75.00 plus shipping.

​DISCONTINUED--ONLY A FEW LEFT!

BFA06. M1919 BMG Muzzle Blank-Fire Adapter. 
Screws in end of barrel jacket.  Replaces original front barrel bearing.  Threaded ½-20 blind to accept interchangeable orifice screws, which tighten inside BFA.  Comes with 3 different diameter orifice screws (sized for U. S. M1909-spec blanks), allen wrench, and instructions.  Made from 125,000 p.s.i. 1144 steel.  Parkerized.  Shipping wt.—26 0z. SALEPRICE: $85.00 plus shipping.

DISCONTINUED--ONLY A FEW LEFT!

BFA09.  M1917/1919 Front Feedway Spacer for Blank-Fire Adapter.  Enables Browning machine gun to function with shorter-than-standard ammunition.  Attaches to belt holding pawl bracket using original belt holding pawl pin.    Made from 1018 steel.  Parkerized.  Shipping wt.—12 oz.  SPECIAL ORDER.Machined to fit your specific blank cartridge.
Price:  $85.00  plus shipping.

SOLD ONLY WITH ITEM BFA06 ABOVE


 
BFA11.  .50 Cal. M2HB Motion Picture Blank-Fire Adapter. 
Converts gun to blank-fire without any visible add-ons  The standard for the motion picture industry since 1984.  Utilizes a two-piece barrel assy., a modified original barrel support, and a feedway adapter.  When assembled to gun, front barrel-half screws into threaded barrel support, and rear half, with a front piston attached, screws into barrel extension and is headspaced like original barrel.  Piston on rear barrel fits in chamber bored into rear of front barrel and provides a means to utilize gas to operate the gun.  Original barrel is used for construction of 2-pc. Barrel, in addition to piston made from 1018 steel.  Front feedway adapter reversible for changing feed direction.  Barrel muzzle threaded 5/8-18 (.250 orifice plug included for use with U.S. Military blanks only).  No orifice plug required for use with  Swanson’s motion picture blanks.  Parkerized.  Shipping wt.--50 lbs.  
SPECIAL ORDER.
Price:  $1,750.00 plus shipping.

.

BFA03.  M1918A2 Replica Flash Hider Blank-Fire Adapter. 
Screws on end of barrel.  Replaces original flash hider. Accepts bipod like original.  Threaded 1/2-20 thru to accept interchangeable orifice screws, which tighten against end of barrel for gas-tight seal.  Comes with 3 different diameter orifice screws (sized for Swanson’s more powerful BAR motion picture blanks), allen wrench, and instructions.  Made from 125,000 p.s.i. 1144 steel. Parkerized. Shipping wt.-13 oz.  SALE PRICE: $75.00 plus shipping.

​DISCONTINUED--ONLY A FEW LEFT!

BLANK-FIRE ADAPTERS